new product uh4pbc, UH4PCC & uh4pdc vishay general semiconductor document number: 88991 revision: 30-jul-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 high current density surface mount ultrafast rectifiers features ? very low profile - typical height of 1.1 mm ? ideal for automated placement ? oxide planar chip junction ? ultrafast recovery times for high frequency ? low forward voltage drop, low power loss ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec ? halogen-free mechanical data case: to-277a (smpc) molding compound meets ul 94v-0 flammability rating. base p/n-e3 - rohs comp liant, commercial grade base p/nhe3 - rohs co mpliant, high reliability/ automotive grade (aec-q101 qualified) base p/n-m3 - halogen-free and rohs compliant, commercial grade base p/nhm3 - halogen-free and rohs compliant, high reliability/automotive grade (aec-q101 qualified) terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 and m3 suffix meets jesd 201 class 1a whisker test, he3 and hm3 suffix meets jesd 201 class 2 whisker test typical applications for use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer computer, automotive and telecommunication applications. primary characteristics i f(av) 2 x 2.0 a v rrm 100 v, 150 v, 200 v i fsm 40 a t rr 25 ns v f at i f = 2.0 a 0.77 v t j max. 175 c to-277a (smpc) k 2 1 anode 1 anode 2 cathode k esmp tm series maximum ratings (t a = 25 c unless otherwise noted) parameter symbol uh4pbc UH4PCC uh4pdc unit device marking code h4bc h4cc h4dc maximum repetitive peak reverse voltage v rrm 100 150 200 v maximum average forward rectified current (fig. 1) total device per diode i f(av) 4.0 2.0 a peak forward surge current 10 ms single half sine-wave superimposed on rated load per diode i fsm 40 a operating junction and storage temperature range t j, t stg - 55 to + 175 c
new product uh4pbc, UH4PCC & uh4pdc vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88991 revision: 30-jul-08 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms note: (1) units mounted on recommended p.c.b. 1 oz. pad layout note: (1) high reliability/automotive grade (aec-q101 qualified) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit instantaneous forward voltage per diode (1) i f = 1.0 a i f = 2.0 a t a = 25 c v f 0.84 0.93 - 1.05 v i f = 1.0 a i f = 2.0 a t a = 125 c 0.68 0.77 - 0.85 reverse current per diode (2) rated v r t a = 25 c t a = 125 c i r - 6.4 5 25 a maximum reverse recovery time per diode i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 20 25 ns typical reverse recovery time per diode i f = 1.0 a, di/dt = 50 a/s, v r = 30 v, i rr = 0.1 i rm 24 - typical softness factor (t b /t a ) per diode i f = 2 a, di/dt = 200 a/s, v r = 200 v, irr = 0.1 i rm t a = 125 c s0.3 - - typical reverse recovery current per diode i rm 5.4 - a typical stored charge per diode q rr 88 - nc typical junction capacitance per diode 4.0 v, 1 mhz c j 21 - pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol uh4pbc UH4PCC uh4pdc unit typical thermal resistance per diode r ja (1) r jl 60 4 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode uh4pdc-e3/86a 0.10 86a 1500 7" diameter plastic tape and reel uh4pdc-e3/87a 0.10 87a 6500 13" diameter plastic tape and reel uh4pdche3/86a (1) 0.10 86a 1500 7" diameter plastic tape and reel uh4pdche3/87a (1) 0.10 87a 6500 13" diameter plastic tape and reel uh4pdc-m3/86a 0.10 86a 1500 7" diameter plastic tape and reel uh4pdc-m3/87a 0.10 87a 6500 13" diameter plastic tape and reel uh4pdchm3/86a (1) 0.10 86a 1500 7" diameter plastic tape and reel uh4pdchm3/87a (1) 0.10 87a 6500 13" diameter plastic tape and reel
new product uh4pbc, UH4PCC & uh4pdc vishay general semiconductor document number: 88991 revision: 30-jul-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. maximum forward current derating curve figure 2. forward power loss characteristics per diode figure 3. typical instantaneous forw ard characteristics per diode 0 1 2 3 4 5 0 25 50 75 100 125 150 175 a v erage for w ard re ctified c u rrent (a) lead temperat u re (c) resisti v e or ind u cti v e load t l meas u red at the cathode band terminal 0 0.4 0. 8 1.2 1.6 2.0 0 0.5 1.0 1.5 2.0 2.5 d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0. 8 d = 1.0 a v erage for w ard c u rrent (a) a v erage po w er loss ( w ) d = t p /t t p t 0.01 0.1 1 10 100 0.2 0.4 0.6 0. 8 1.0 1.2 1.4 1.6 1. 8 t a = 150 c t a = 125 c t a = 25 c instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) figure 4. typical reverse leak age characteristics per diode figure 5. typical juncti on capacitance per diode figure 6. typical transient thermal impedance per diode 0.001 0.01 0.1 1 10 100 10 20 30 40 50 60 70 8 0 90 100 percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent ( a) t a = 150 c t a = 125 c t a = 25 c 10 100 0.1 1 10 100 re v erse v oltage ( v ) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p j u nction to am b ient 0.01 0.1 1 10 100 1 10 100 t - p u lse d u ration (s) transient thermal impedance (c/ w )
new product uh4pbc, UH4PCC & uh4pdc vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88991 revision: 30-jul-08 4 package outline dimensions in inches (millimeters) conform to jedec to-277a 0.016 (0.40) 0.006 (0.15) 0.047 (1.20) 0.039 (1.00) 0.1 8 7 (4.75) 0.175 (4.45) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.23 8 (6.05) 0.171 (4.35) 0.167 (4.25) k 21 0.026 (0.65) n om. to-277a (smpc) 0.146 (3.70) 0.134 (3.40) 0.0 8 7 (2.20) 0.075 (1.90) 0.1 8 9 (4. 8 0) 0.173 (4.40) 0.049 (1.24) 0.037 (0.94) 0.053 (1.35) 0.041 (1.05) 0.030 (0.75) n om. 0.0 8 4 (2.13) n om. 0.155 (3.94) n om. mountin g pad layout 0.26 8 (6. 8 0) 0.1 8 6 (4.72) mi n . 0.050 (1.27) mi n . 0.041 (1.04) 0.055 (1.40) mi n . 0.1 8 9 (4. 8 0) mi n .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
